AVK Supa Lock™ service connection valve, DI, PN16
With Supa Lock™ spigot end/PRK coupling, DN32
Contact
AVK International A/S
Bizonvej 1, Skovby, 8464 Galten, Denmark
Supa Lock™ service connection valve with spigot end/PRK coupling. For drinking water and neutral liquids to max. 20° C. Note: The maximum working temperature is set according to the ISO9080 lifetime requirements for PE pipes, and is therefore not the max. temperature for the valve.
| Variant 103/50-003 | |
|---|---|
| Connection: | Supa Lock™ |
| Material: | Ductile Iron |
| DN: | DN32 - DN32 |
| PN: | PN16 |
| Closing direction: | Clockwise to Close |
Features
- Wedge of brass CW626N vulcanized with EPDM rubber – both brass and rubber certified for use in contact with drinking water– and shaped with guides and a special rubber profile ensuring low closing torques
- Stainless steel stem with rolled threads providing high strength
- Stem sealing with an NBR wiper ring, a polyamide bearing with four NBR O-rings and an EPDM rubber manchette
- EPDM bonnet gasket fixed in a recess
- Countersunk and sealed stainless steel bonnet bolts encircled by the bonnet gasket
- Fusion bonded epoxy coating in compliance with DIN 3476 part 1 and EN 14901, GSK approved
- Easy two-step assembly by pushing the Supa Lock™ spigot end into the Supa Lock™ socket end and clicking on the safety retainer
- The safety retainer is easy to mount and demount, and as extra safety the patented Supa Lock™ joint prevents
- demounting when the system is under pressure
- The spigot valve end is designed with rotation stop to prevent the valve from rotating during the tapping/drilling process
- The Supa Lock™ joint is sealed by two large O-rings of drinking water approved EPDM rubber
- Full Ø32 bore for standard drill bit sizes
- PRK coupling of POM
Downloads
Reference nos. and dimensions:
Scroll for more info
| AVK ref. no. | DN mm |
Dd mm |
L mm |
H3 mm |
H mm |
F mm |
F1 mm |
F2 mm |
Theoretical weight/kg |
|---|---|---|---|---|---|---|---|---|---|
| 103-032-50-500464 | 32 | 32 | 200 | 230 | 190 | 12 | 15 | 35 | 3.5 |
| 103-032-50-510464 | 32 | 40 | 200 | 230 | 190 | 12 | 15 | 35 | 3.5 |
2D/3D drawings
Enquiry
Scroll for more info
Components
| 1. | Stem | Stainless steel 1.4104 (430F) |
| 2. | Wiper ring | NBR rubber |
| 3. | O-ring | NBR rubber |
| 4. | Bearing | Polyamide |
| 5. | Thrust collar | Brass, DZR CW602N |
| 6. | Manchette | EPDM rubber |
| 7. | Bonnet | Ductile iron GJS-500-7 (GGG-50) |
| 8. | Bonnet gasket | EPDM rubber |
| 9. | Bonnet bolt | Stainless steel A2, sealed with hot melt |
| 10. | Body | Ductile iron GJS-500-7 (GGG-50) |
| 11. | Wedge | Brass, DZR CW626N with EPDM |
| 12. | Safety retainer | POM |
| 13. | O-ring | EPDM rubber |
| 14. | PRK coupling | POM |
Test/Approvals
- Hydraulic test according to EN 1074-1 and 2 / EN 12266 |
- Seat: 1.1 x PN (in bar), Body: 1.5 x PN (in bar). Operation torque test
- Belgaqua approved
Standards
- Designed according to EN 1074 part 1 & 2, Designed according to EN 1171
Use with this product
AVK Supa Lock™ tapping saddle, PN16
For cast iron, ductile iron and steel pipes, with Supa Lock™ socket outlet
AVK Supa Lock™ straight fitting w. PRK coupling, brass, PN16
For PE pipes, Supa Lock™ spigot end / PRK coupling
AVK Supa Lock™ straight fitting w. screw coupling, brass, PN16
For PE pipes, Supa Lock™ spigot end / screw coupling
AVK Supa Lock™ straight push-in fitting, PN16
For PE pipes, Supa Lock™ spigot end/push-in socket end
