AVK CENTRIC WAFER BUTTERFLY VALVE, PN10/16

Stainless steel disc, with loose EPDM liner for drinking water, bare shaft, DN25-1000

AVK headquater in Skovby Galten, Denmark

Contact

AVK International A/S

Bizonvej 1, Skovby, 8464 Galten, Denmark

Centric butterfly valve with loose liner and bare shaft - Wafer for drinking water and neutral liquids to max. 95°C

AVK centric butterfly valves with loose liner are available in wafer, lug and U-section design with a wide standard range of actuators. The butterfly valves are designed with square driven anti-blowout shaft and slim disc of acid-resistant stainless steel with machined and polished disc edges resulting in low torques.

Variant 820/00-025
Material: Ductile iron/ 1.4408 disc
DN: DN25 - DN1000
PN: PN10/16
Closing direction: Clockwise to Close

Features

  • Ductile iron with long neck for insulation
  • Loose liner of drinking water approved EPDM with integrated gasket faces and “saw profile” for optimum grip in body
  • Square driven anti-blowout shaft in one-piece design up to DN 400, and from DN 450 with key and keyway in two-piece stub design with two self-lubricating bearings
  • Slim disc of acid-resistant stainless steel with machined and polished edges reducing the friction between liner and disc
  • Low operating torques allowing use of cost-effective actuators
  • 200 μ epoxy coating up to DN 400, 250 μ polyurethane from DN 450, optionally other coatings
  • According to PED 2014/68/EC appendix 1
  • Other flange drillings on request

Downloads

Datasheet
Installation
Appendix
Certificate(s)

Reference nos. and dimensions:

Scroll for more info
AVK ref. no. DN
mm
Product
PN Class
Unbalance pressure
bar
Actuator
Flange
L
mm
L2
mm
H2
mm
W2
mm
W3
mm
F
mm
F2
mm
Theoretical
weight/kg
820-0025-00-541L0160002 25 PN 10/16 16 F05 30 101 51 110 #8 12 1.0
820-0032-00-541L0160002 32 PN 10/16 16 F05 30 101 51 110 #8 12 1.0
820-0040-00-541L0160002 40 PN 10/16 16 F05 33 108 55 130 #8 12 1.3
820-0050-00-541L0160002 50 PN 10/16 16 F05 43 120 72 135 #11 12 1.8
820-0065-00-541L0160002 65 PN 10/16 16 F05 46 138 82 150 #11 12 2.3
820-0080-00-541L0160002 80 PN 10/16 16 F05 46 142 92 160 #11 12 2.3
820-0100-00-541L0160002 100 PN 10/16 16 F05/F07 52 162 110 180 #11 12 3.9
820-0125-00-541L0160002 125 PN 10/16 16 F05/F07 56 181 128 195 #14 16 5.0
820-0150-00-541L0160002 150 PN 10/16 16 F07 56 205 141 210 #14 16 5.9
820-0200-00-541L0160002 200 PN 10/16 16 F07 60 260 174 240 #17 19 9.3
820-0250-00-541L0160002 250 PN 10/16 16 F10/F12 68 310 201 279 #22 24 17
820-0300-00-541L0160002 300 PN 10/16 16 F10/F12 78 362 234 315 #22 24 24
820-0350-00-04020160002 350 PN 10/16 16 F12 80 425 268 330 #22 40 42
820-0400-00-04020160002 400 PN 10/16 16 F12 102 475 299 365 #27 40 57
820-0450-00-04060031002 450 PN10 10 F14 113 538 355 397 Ø45 65 95
820-0450-00-04060161002 450 PN16 16 F14 113 538 355 397 Ø45 65 95
820-0500-00-04060031002 500 PN10 10 F14 126 595 393 437 Ø45 65 125
820-0500-00-04060161002 500 PN16 16 F14 126 595 393 437 Ø45 65 125
820-0600-00-04060031002 600 PN10 10 F16 153 695 464 522 Ø70 80 180
820-0600-00-04060161002 600 PN16 16 F16 153 695 464 522 Ø70 80 180
820-0700-00-04060031002 700 PN10 10 F25 168 800 503 565 Ø70 80 280
820-0700-00-04060161002 700 PN16 16 F25 168 800 503 565 Ø70 80 280
820-0800-00-04060031002 800 PN10 10 F25 190 908 577 627 ø70 80 387
820-0800-00-04060161002 800 PN16 16 F25 190 908 577 627 Ø70 80 387
820-0900-00-04060031002 900 PN10 10 F30 204 1015 643 696 Ø80 100 502
820-0900-00-04060161002 900 PN16 16 F30 204 1015 643 696 Ø80 100 502
820-1000-00-04060031002 1000 PN10 10 F30 218 1133 693 745 Ø80 100 710
820-1000-00-04060161002 1000 PN16 16 F30 218 1133 693 745 Ø80 100 710
2D/3D drawings
Enquiry
Scroll for more info

Components

1. Bolt Stainless steel A2
2. Washer Stainless steel A2
3. O-ring NBR rubber
4. Shaft Stainless steel 420
5. Body Ductile iron GJS-400-15 (GGG-40)
6. Liner EPDM rubber
7. Disc Stainless steel 316

Test/Approvals

  • Hydraulic test according to EN 12266-1, P10/P12, Hydraulic test according to EN 12266-1, P10/P12
  • Approved according to ACS-France
  • Approved according to SVGW Certificate No. 9901-4048
  • Approved for wastewater / pressure test EN12266-1
  • Approved according to PED.BD.000001, TÜV-Mark, EU pressure directive 2014/68
  • Approved according to ANSI/NSF Standard 61

Standards

  • Designed according to EN 593
  • Face-to-face dimension according to DIN/EN 558-1, series 20 (K1)
  • End conn. EN1092-2 PN6/10/16, AS2129 TabD/E, ASME B16.5/B16.47 CL 150
0 Files In the package
Our website uses cookies for statistical analysis, to improve our website and serve you optimally. By visiting our website, you consent to our and third party use of cookies as described in our privacy and cookie policy.
Read more