AVK Supa Lock™ SERVICE CONNECTION ANGLE VALVE, DI, PN16

Supa Lock™ spigot end/push-in socket end, DN32

Contact

AVK International A/S

Bizonvej 1, Skovby, 8464 Galten, Denmark

Supa Lock™ service connection angle valve with push-in socket end. For drinking water and neutral liquids to max. 20°C. Note: The maximum working temperature is set according to the ISO9080 lifetime requirements for PE pipes, and is therefore not the max. temperature for the valve.

AVK Supa Lock™ is a patented service connection system consisting of valves, tapping saddles and fittings with a fast two-step assembly without threads or use of tools. Supa Lock™ features a corrosion protected push-in and quick-lock joint secured by a safety retainer which prevents demounting under pressure. The Supa Lock™ service connection angle valve has one Supa Lock™ spigot end and one push-in socket end, and is of the renowned AVK design with triple safety stem sealing and vulcanized wedge.

Variant 103/31-003
Connection: Supa Lock™
Material: Ductile Iron
DN: DN32
PN: PN16
Closing direction: Clockwise to Close

Features

  • Wedge of low-lead brass CW626N vulcanized with drinking water approved EPDM rubber and shaped with guides and a special rubber profile ensuring low closing torques
  • Stainless steel stem with rolled threads providing high strength
  • Stem sealing with an NBR wiper ring, a polyamide bearing with four NBR O-rings and an EPDM rubber manchette
  • EPDM bonnet gasket fixed in a recess
  • Countersunk and sealed stainless steel bonnet bolts encircled by the bonnet gasket
  • Fusion bonded epoxy coating in compliance with DIN 3476 part 1 and EN 14901, GSK approved
  • Easy two-step assembly by pushing the Supa Lock™ spigot end into the Supa Lock™ socket end and clicking on the safety retainer
  • The safety retainer is easy to mount and demount, and as extra safety the patented Supa Lock™ joint prevents demounting when the system is under pressure
  • The Supa Lock™ joint is sealed by two large O-rings of drinking water approved EPDM rubber
  • Push-in socket fitted with EPDM rubber seal ring and tensile ring of POM
  • Note: The maximum working temperature of 20°C is set according to the ISO9080 lifetime requirements for PE pipes. For higher working temperatures expect a reduction of the PE pipe’s lifetime. Please refer to the local pipe manufacturer for further information

Reference nos. and dimensions:

Close Download package
AVK ref. no. DN
mm
Dd
mm
Product
PN Class
L
mm
H
mm
H3
mm
F
mm
F1
mm
F2
mm
Theoretical
weight / kg
2D/3D drawings Enquiry
103-032-31-40-0464 32 32 PN16 172 176 267 12 15 35 3.1
103-032-31-41-0464 32 40 PN16 183 176 271 12 15 35 3.3

Downloads

Datasheet (PDF)
Installation

Components

1. Stem Stainless steel 1.4104 (430F)
2. Wiper ring NBR rubber
3. O-ring NBR rubber
4. O-ring NBR rubber
5. Bearing Polyamide
6. Thrust collar Brass, DZR CW602N
7. Manchette EPDM rubber
8. Bonnet bolt Stainless steel A2, sealed with hot melt
9. Bonnet Ductile iron GJS-500-7 (GGG-50)
10. Bonnet gasket EPDM rubber
11. Body Ductile iron GJS-500-7 (GGG-50)
12. Wedge Brass, DZR CW626N with EPDM
13. Tensile ring POM
14. Seal ring EPDM rubber
15. Safety retainer POM
16. O-ring EPDM rubber

Test/Approvals

  • Hydraulic test according to EN 1074-1 and 2 / EN 12266
  • Seat: 1.1 x PN (in bar), Body: 1.5 x PN (in bar). Operation torque test
  • Belgaqua approved

Standards

  • Designed according to EN 1074 part 1 & 2, Designed according to EN 1171
0 Files In the package
Our website uses cookies for statistical analysis, to improve our website and serve you optimally. By visiting our website, you consent to our and third party use of cookies as described in our privacy and cookie policy.
Read more