AVK SUPA MAXI™ FLANGE ADAPTOR, PN10/16

Universal and tensile, A2 bolts, EPDM sealing, DN40-800

AVK headquater in Skovby Galten, Denmark

Contact

AVK International A/S

Bizonvej 1, Skovby, 8464 Galten, Denmark

Supa Maxi™ flange adaptor, universal and tensile with A2 bolts / A4 nuts. For drinking water and neutral liquids -10°C to +70°C

AVK’s Supa Maxi™ range of universal tensile couplings sets a new standard. The patented SupaGrip™ sealing support system with flexible bracket ensures full support of the gasket and tensile strength. Supa Maxi™ couplings are easy to install as they offer ±4° angular deflection in both ends, lifting eyes, and bolts tightened from the sleeve side with no need for retightening. The permanent protection caps protect the couplings during transport and installation.

fire
fire
Variant 633/00-001
Connection: Supa Maxi™ Coupling
Material: Ductile Iron
DN: DN40 - DN800
PN: PN16

Features

  • Patented SupaGrip™ sealing support system with flexible bracket ensures full support of the gasket even at minimum pipe size
  • Tensile strength on all pipes is ensured by two different metal grip segments - every second of brass for PE/PVC/GRP and of hardened stainless steel for cast iron/ductile iron/steel/stainless steel/asbestos cement pipes.
    For PE pipes a support bush is to be used
  • ±4° angular deflection
  • Large sealing ranges
  • Ductile iron sleeve and bracket of cast steel with fusion bonded epoxy coating in compliance with DIN 3476 part 1 and EN 14901, GSK approved
  • Gasket of drinking water approved EPDM rubber
  • Bolts of A2 and nuts of A4 are anti-friction coated to prevent galling
  • Permanent protection caps protect the coupling during handling and installation
  • Large insertion depth tolerances allow for cutting the pipe slightly angled
  • Bolts are tightened from the sleeve side for full access when space is limited
  • Re-tightening of bolts is not necessary
  • Lifting eye in DN100-800

Downloads

Datasheet
Certificate(s)
Installation, Operation & Maintenance

Reference nos. and dimensions:

Scroll for more info
AVK ref. no. DN
mm
Product
PN Class
Flange
drilling
Seal range
SR1 mm
L
mm
D
mm
H3
mm
Theoretical
weight/kg
Notes
633-071-00-006 40-50 PN16 10/16 48-71 197 200 165 5.0
633-091-00-006 50-65 PN16 10/16 69-91 197 226 185 6.0
633-106-00-006 80 PN16 10/16 82-106 198 235 200 6.5
633-133-00-006 100 PN16 10/16 104-133 203 268 229 9.0
633-133-01-006 80 PN16 10/16 104-133 210 268 200 9.0
633-161-00-006 100/125 PN16 10/16 132-159 198 285 229 11
633-161-01-006 150 PN16 10/16 132-159 198 285 285 11
633-188-00-006 150 PN16 10/16 159-188 220 340 285 12
633-227-00-006 200 PN16 10/16 193-227 243 389 343 19
633-257-00-006 225 PN16 10/16 224-257 245 437 406 25
633-257-01-006 200 PN16 10/16 224-257 245 437 343 25
633-301-00-006 250 PN16 10/16 266-301 254 476 406 28
633-356-00-006 300 PN16 10/16 314-356 282 545 483 38
633-396-00-006 350 PN16 10/16 352-396 419 612 540 87
633-442-00-006 400 PN16 10/16 392-442 447 661 597 80
633-510-00-006 450 PN16 10/16 448-510 614 740 660 145
633-552-00-006 500 PN16 10/16 498-552 605 772 735 166
633-652-00-006 600 PN16 10/16 604-652 634 872 850 213
633-745-00-006 700 PN16 10/16 700-745 650 991 920 379 PN16 only for non-tensile // Tensile up to 16 bar
633-842-00-00600004 800 PN16 10/16 800-842 690 1100 1035 437 For metal/AC pipes // PN16 only for non-tensile // Tensile up to 10 bar
633-842-00-00600006 800 PN16 10/16 800-842 690 1100 1035 437 For plastic pipes // PN16 only for non-tensile // Tensile up to 10 bar
BIM drawings
2D/3D drawings
Enquiry
Scroll for more info

Components

1. Nut Stainless steel A4
2. Bolt Stainless steel A2
3. Washer Stainless steel A2
4. Grip segment Stainless steel / brass
5. Gasket EPDM rubber
6. Sleeve Ductile iron
7. Bracket Cast steel
8. Protection cap PE

Test/Approvals

  • DN700 tensile up to 16 bar
  • DN800 tensile up to 10 bar
  • Approved according to KIWA Certificate K 66561
  • Belgaqua approved
  • Approved according to ÖVGW Certificate W 1.604
  • Approved according to SVGW Certificate No. 1205-6041

Standards

  • Designed according to EN 14525
  • Universal flange drilling to EN1092-2 (ISO 7005-2), PN 10/16
0 Files In the package