AVK FABRICATED FLANGE ADAPTOR, PN10
Non-tensile, for coated steel pipes, DN350-1100
Contact
AVK International A/S
Bizonvej 1, Skovby, 8464 Galten, Denmark
Flange adaptor for Coated steel pipes PN10
The Series 260 is a fabricated flange adaptor, suitable for use with water and neutral liquids (wastewater)
Variant 260/30-009 | |
---|---|
Connection: | Mechanical Joint x Flange |
Material: | Steel |
DN: | DN350 - DN1100 |
PN: | PN10 |
Features
- Maximum Working Pressure: 10 Bar, to -0.8 Bar (negative pressure)
- Temperature Range: -10°C to +70°C, Insulation essential for temperatures of 0°C and below
- EPDM seals
- Corrosion resistant construction
- Fusion bonded epoxy coating
- Zinc Plated and Passivated fasteners
- Sealing range nominal diameter +2mm to -5mm
- Angular deflection:
- Less than DN600 is + 4°
- DN700 to DN800 is + 3°
- DN900 to DN1200 is + 2°
Downloads
Datasheet
Installation, Operation & Maintenance
Reference nos. and dimensions:
Scroll for more info
AVK ref. no. | DN mm |
H3 mm |
L mm |
L5 mm |
Pipe dia. mm |
W mm |
Theoretical weight/kg |
---|---|---|---|---|---|---|---|
260-30-0359-0000 | 350 | 505 | 178 | 25 | 359 | 505 | 32 |
260-30-0409-0002 | 400 | 565 | 178 | 25 | 409 | 565 | 38 |
260-30-0460-0003 | 450 | 615 | 178 | 25 | 460 | 615 | 46 |
260-30-0511-0004 | 500 | 670 | 178 | 25 | 511 | 670 | 46 |
260-30-0613-0005 | 600 | 780 | 178 | 25 | 613 | 780 | 56 |
260-30-0714-0006 | 700 | 895 | 178 | 25 | 714 | 895 | 69 |
260-30-0816-0007 | 800 | 1015 | 178 | 25 | 816 | 1015 | 83 |
260-30-1019-0009 | 1000 | 1230 | 198 | 30 | 1019 | 1230 | 127 |
260-30-1121-0010 | 1100 | 1340 | 198 | 30 | 1121 | 1340 | 114 |
2D/3D drawings
Enquiry
Scroll for more info
Components
1. | Body | Steel S275JR |
2. | Gland ring | Steel S275JR |
3. | Seal | EPDM rubber |
4. | Studs | Steel gr. 8.8, zinc plated, passivated |
5. | Washer | Steel gr. 8, zinc plated, passivated |
6. | Nuts | Steel gr. 8, zinc plated, passivated |
Test/Approvals
- Hydraulic test according to 1.5 x PN
- Materials approved according to WRAS
Standards
- Designed to all standards
- Standard flange drilling to EN1092-2 (ISO 7005-2), PN10