AVK NEEDLE VALVE, PN40

Gearbox, stainless steel trim, DN80-600

Contact

AVK International A/S

Bizonvej 1, Skovby, 8464 Galten, Denmark

Needle valve PN40 for pressure and flow control applications, for water and neutral liquids to max. 70° C.

AVK series 872 needle valves are designed for throttling and control of pressure and flow at high flow rates and high differential pressures. The focus is on durability and reliability with the sturdy valve housing made of either stainless steel or ductile iron coated with fusion bonded epoxy. It controls with high precision and the high quality materials guarantee long service life with easy maintenance access.

Variant 872/00-003
Connection: Flanged
Material: Ductile Iron
DN: DN80 - DN600
PN: PN 40

Features

  • One-piece body construction
  • Symmetric flow path with annular flow cross section in any open position
  • Pressure balance in chamber inside for low operating torque
  • Internal body shape is optimized to give low head loss coefficient in fully open position
  • 4 - 6 guide rails ensure very low vibration
  • Main seal in the no-flow zone at the valve outlet
  • Gaskets in technopolymer (TPU) for high resistance to abrasion
  • All iron parts coated with min. 250 μm fusion bonded epoxy, blue RAL 5005
  • Easy access for maintenance
  • Double O-rings sealed drive shaft
  • Stainless steel internal parts and fasteners
  • Functions:
    • Flow control
    • Pressure regulation
    • Pump start
    • Reservoir inlets
    • Discharge
    • Turbine by-pass
    • Air regulation

Reference nos. and dimensions:

AVK ref. no. DN
mm
Flange
drilling
A
mm
B
mm
D
mm
H3
mm
L
mm
W
mm
Theoretical
weight / kg
Notes Enquiry
872-0080-00-609001001 80 PN40 125 80 95 200 260 305 19
872-0100-00-609001001 100 PN40 145 80 120 220 300 335 27
872-0150-00-609001001 150 PN40 175 80 135 285 350 400 49
872-0200-00-601001000 200 PN40 220 150 150 425 400 505 122
872-0250-00-601001000 250 PN40 260 165 165 475 450 580 165
872-0300-00-601001000 300 PN40 305 185 185 535 500 660 265
872-0350-00-601001000 350 PN40 350 205 205 595 550 770 350
872-0400-00-601001000 400 PN40 385 235 235 665 600 835 435
872-0450-00-601001000 450 PN40 420 240 240 745 650 900 550
872-0500-00-601001000 500 PN40 445 245 245 755 700 965 700
872-0600-00-601001000 600 PN40 505 280 280 925 800 1090 950

Downloads

Datasheet (PDF)

Components

1. Shaft Stainless steel 1.4028
2. Screw Stainless steel A2-70
3. Key Stainless steel 1.4401
4. Cap Alu-bronze CC333G
5. O-ring NBR rubber
6. Bush Alu-bronze CC333G
7. Bush Alu-bronze CC333G
8. O-ring NBR rubber
9. Plug Plastic
10. Cap Stainless steel 1.4028
11. O-ring NBR rubber
12. Body Ductile iron GJS-500-7 (GGG-50)
13. Crank Ductile iron GJS-500-7 (GGG-50)
14. Pin Stainless steel 1.4028
15. Split pin Stainless steel 1.4401
16. Bush Alu-bronze CC333G
17. Guide Brass CW617N
18. Piston tube Stainless steel 1.4301
19. Eye bolt Steel, zinc coated
20. Gasket PUR
21. O-ring NBR rubber
22. Gasket Polyurethane
23. Flange Stainless steel 1.4301
24. Piston flange Stainless steel 1.4301
25. Plate Stainless steel 1.4301
26. Bush Alu-bronze CC333G
27. Connection rod Stainless steel 1.4028
28. Pin Stainless steel 1.4028
29. Seal ring Stainless steel 1.4301
30. Key Stainless steel 1.4401
31. Set screw Stainless steel A2-70
32. Bolt, socket head Stainless steel A2-70
33. Guide Brass CW617N
34. Ring Stainless steel 1.4301
35. Bolt, hexagon head Stainless steel A2-70
36. Bolt, socket head Stainless steel A2-70
37. Bolt, socket head Stainless steel A2-70
38. Gearbox

Test/Approvals

  • Hydraulic test according to EN 1074-1 and 5/ EN12266, seat: 1.1 x PN (in bar), body 1.5 x PN (in bar)

Standards

  • Designed according to EN 1074 - 5
  • Face-to-face dimension according to EN 558 Table 2 Basic Series 15
  • Flange drilling EN1092, PN40
Our website uses cookies for statistical analysis, to improve our website and serve you optimally. By visiting our website, you consent to our and third party use of cookies as described in our privacy and cookie policy.
Read more