1. Home /
  2. Product finder

AVK DOUBLE ECCENTRIC BUTTERFLY VALVE, PN10/16

Stainless steel seat, ISO-input IP67 gearbox, DN700-2800

AVK headquater in Skovby Galten, Denmark

Contact

AVK International A/S

Bizonvej 1, Skovby, 8464 Galten, Denmark

Double eccentric butterfly valve with stainless steel seat and ISO-input IP67 gearbox, for drinking water and neutral liquids to max. 70°C

AVK double eccentric butterfly valves are designed with tilted disc for easy operation. The disc seal is made of AVK’s drinking water approved EPDM rubber featuring an excellent compression set and thus ability to regain its original shape. The high quality GSK/DVGW or WRAS approved epoxy coating and fully encapsulated shaft/disc connection ensure high durability. The valves up to DN2400 are suitable for bi-directional application, DN2600 and above must be operated uni-directional.

Variant 756/102-IS2
Connection: Flanged
Material: Ductile Iron
DN: DN700 - DN2800
PN: PN10/16
Closing direction: Clockwise to Close

Features

  • Replaceable seat ring of stainless steel fixed with bolts and sealed with an O-ring
  • Machined and epoxy coated ductile iron seat integrated in the body
  • The double eccentric design combined with a tilted disc allows release of seal compression after only few degrees of opening resulting in low operating torque 
  • Disc firmly fixed to the shaft to prevent fluttering and a slight tilt allows for precise adjustment of the closed position
  • Disc seal profile and rubber quality ensure low closing torque
  • All rubber parts are drinking water approved by multiple institutes
  • Fasteners in stainless steel A2
  • Stainless steel shaft and seal retainer ring
  • All threaded connections are sealed with O-rings for protection against medium and environment
  • Radial bearings in self-lubricating PTFE/bronze composite
  • Shaft ends: DN≤600: Fitted with an end cover that seals the disc interior against corrosion. DN≥700: Fully encapsulated in the disc and fixed with O-ring sealed dowels held in place with a security plate. Key and keyway as backup
  • Replaceable shaft seals with two EPDM O-rings and an NBR gasket protecting against contamination from outside
  • Bi-directional operation up to DN2400 and uni-directional from DN2600 and above
  • Body and disc of ductile iron with fusion bonded epoxy coating 250µm RAL 5017 in compliance with DIN 3476 part 1 and EN 14901, approved by GSK and WRAS-DVGW/W270/UBA
    DN≥1800: Body and disc coated with 2-pack epoxy, blue RAL 5017 externally, ribbon blue or cream white internally, according to WRAS
  • IP67 Rotork ISO flange gear, operated by actuator or handwheel. Coated grey RAL7006, 100µm. Input shaft, bolts and nuts in stainless steel AISI 303

Downloads

Datasheet
Related Datasheets
Appendix
Tender Text
Certificate(s)
Installation, Operation & Maintenance
Animation
AVK butterfly 756 2024.mp4
Guidelines

Reference nos. and dimensions:

Scroll for more info
AVK ref. no. DN
mm		 Flange
drilling		 L
mm		 L1
mm		 L2
mm		 H2
mm		 W1
mm		 W2
mm		 W3
mm		 W4
mm		 D1
mm		 A
mm		 B
mm		 C
mm		 Actuator
Flange		 Theoretical
weight/kg		 Notes
756-0700-1-0400209 700 PN10 430 127 133 550 448 730 533 543 20 335 605 255 F10 469
756-0700-1-1400209 700 PN16 430 127 133 550 455 725 533 543 20 342 600 297 F10 538
756-0800-1-0400209 800 PN10 470 156 162 620 508 765 627 636 20 313 670 349 F10 632
756-0800-1-1400209 800 PN16 470 156 162 620 513 795 627 636 20 342 670 317 F10 697
756-0900-1-0400209 900 PN10 510 186 192 690 558 865 722 730 20 342 740 337 F10 780
756-0900-1-1400209 900 PN16 510 186 192 690 563 835 722 730 20 313 740 369 F10 885
756-1000-1-0400209 1000 PN10 550 216 222 770 615 1040 816 824 20 469 836 306 F10 996
756-1000-1-1400209 1000 PN16 550 216 222 770 628 1041 816 824 20 469 837 306 F10 1131
756-1200-1-0400209 1200 PN10 630 269 275 855 728 1134 986 993 20 469 930 346 F10 1541
756-1200-1-1400209 1200 PN16 630 269 275 855 743 1121 986 993 20 469 917 346 F10 1745
756-1400-1-0400209 1400 PN10 710 333 339 970 838 1241 1182 1189 20 469 1037 386 F10 2228
756-1400-1-1400209 1400 PN16 710 333 339 970 843 1253 1182 1189 20 505 1049 422 F10 2474
756-1500-1-0400209 1500 PN10 750 363 369 1070 893 1341 1274 1281 20 469 1137 406 F10 2684
756-1500-1-1400209 1500 PN16 750 363 369 1070 913 1353 1274 1281 20 505 1149 442 F10 3003
756-1600-1-0400209 1600 PN10 790 390 396 1145 958 1428 1359 1366 20 505 1224 462 F10 3189
756-1600-1-1400209 1600 PN16 790 390 396 1145 965 1428 1359 1366 20 505 1224 462 F14 3470
756-1800-1-0400209 1800 PN10 870 448 454 1220 1058 1490 1540 1547 20 605 1299 714 F14 3796
756-1800-1-1400209 1800 PN16 870 448 454 1220 1065 1490 1540 1547 20 605 1299 714 F10 4363
756-2000-1-0400209 2000 PN10 950 521 527 1382 1180 1653 1753 1760 20 605 1462 753 F14 5327
756-2000-1-1400209 2000 PN16 950 521 527 1382 1180 1652 1753 1760 20 605 1461 754 F14 6035
756-2200-1-0400209 2200 PN10 1030 576 582 1472 1275 1731 1926 1932 20 605 1540 794 F10 6652
756-2200-1-1400209 2200 PN16 1030 576 582 1482 1278 1742 1926 1932 20 634 1551 858 F10 8023
756-2400-1-0400209 2400 PN10 1110 633 639 1613 1380 1859 2103 2109 20 648 1668 877 F10 9360
756-2400-1-1400209 2400 PN16 1110 633 639 1584 1382 1859 2103 2109 30 786 1668 732 F14 11550
756-2600-1-0400209 2600 PN10 1190 693 699 1820 1490 2066 2289 2295 20 635 1861 879 F10 11139 Uni-directional
756-2600-1-1400209 2600 PN16 1190 693 699 1855 1535 2120 2289 2295 30 790 1920 920 F14 14260 Uni-directional
756-2800-1-0400209 2800 PN10 1270 738 739 1921 1600 2164 2441 2442 20 648 1973 957 F10 12850 Uni-directional
BIM drawings
2D/3D drawings
Enquiry
Scroll for more info

Components

1. Key Stainless steel A2
2. Drive shaft Stainless steel 431
3. Seal housing Bronze
4. O-ring EPDM rubber
5. Self-lubricating bearing Bronze / PTFE composite
6. Disc cover Stainless steel
7. Disc cover gasket EPDM rubber
8. Dowel Stainless steel A2
9. Blanking flange Ductile iron GJS-500-7
10. Body Ductile iron GJS-500-7
11. Disc Ductile iron GJS-500-7
12. Screw Stainless steel A2
13. Security plate Stainless steel
14. Spring washer Stainless steel A2
15. Washer Stainless steel A2
16. Nut Stainless steel A2
17. Thrust bearing Bronze
18. End plate Ductile iron GJS-500-7
19. Gasket EPDM rubber
20. Stub shaft Stainless steel 431
21. Safety key Stainless steel A2
22. Bolt Stainless steel A2
23. Washer Stainless steel A2
24. Seal retainer ring Stainless steel
25. Seat ring Stainless steel
26. Disc seal EPDM rubber
27. Gearbox Cast iron

Test/Approvals

  • Hydraulic test according to EN 1074-1 and 2 / EN 12266
  • Belgaqua approved
  • Approved according to KIWA Certificate K 6320 (DN≤800)
  • Approved for drinking water according to WRAS Certificate No. 2307007 (DN900-1200)

Standards

  • Designed according to EN 593
  • Face-to-face dimension according to EN 558 Table 2 Series 14 (DN≤2000)/DIN 3202 - F4 (DN>2000)
  • Flange drilling to EN1092-2 (DN700-2000) / DIN2501 (DN>2000 PN10 body) / special drilling (DN>2000 PN16 body)
0 Files In the package