AVK DOUBLE ECCENTRIC BUTTERFLY VALVE, PN10/16

Integral seat, ISO-input IP67 gearbox, plate disc, long, DN150-600

AVK headquater in Skovby Galten, Denmark

Contact

AVK International A/S

Bizonvej 1, Skovby, 8464 Galten, Denmark

Double eccentric butterfly valve to EN 593 w. integral seat and ISO-input IP67 gearbox for drinking water and neutral liquids to max. 70°C

AVK double eccentric butterfly valves are designed with tilted disc for easy operation. The disc seal is made of AVK’s drinking water approved EPDM rubber featuring an excellent compression set and thus ability to regain its original shape. The high quality GSK approved epoxy coating and the corrosion protected shaft end zones ensure high durability. The valves are suitable for bi-directional application.

Variant 756/102-142
Connection: Flanged
Material: Ductile Iron
DN: DN150 - DN600
PN: PN10/16
Closing direction: Clockwise to Close

Features

  • The tilted disc releases the compression of the disc sealing after a few degrees of opening resulting in low operating torque

  • The disc seal profile and rubber quality ensure low closing torques
  • All rubber parts are multi approved
  • Seal retainer ring of epoxy coated steel
  • The threaded bolt holes in the disc are corrosion protected with O-rings
  • Machined and epoxy coated ductile iron seat integrated in the body
  • Shaft of stainless steel with self-lubricating bearings
  • The shaft ends are corrosion protected with a stainless steel security plate and a gasket
  • Replaceable shaft sealing with an EPDM O-ring on a stainless steel ring, a back-up EPDM O-ring in the housing, and a flat NBR gasket
  • Optional locking device
  • Body and disc of ductile iron with fusion bonded epoxy coating in compliance with DIN 3476 part 1 and EN 14901, GSK approved, RAL 5017

Downloads

Datasheets
Appendix
Installation
Guidelines

Reference nos. and dimensions:

Scroll for more info
AVK ref. no. DN
mm
Flange
drilling
D1
mm
L
mm
L1
mm
L2
mm
H2
mm
W1
mm
W2
mm
W3
mm
W4
mm
W5
mm
A
mm
B
mm
C
mm
Actuator
Flange
Theoretical
weight/kg
756-0150-1-14002 150 PN10/16 20 210 - - 200 155 278 - - 122 216 176 F10 38
756-0200-1-04002 200 PN10 20 230 - - 227 182 297.5 - - 172 122 235 186 F10 40
756-0200-1-14002 200 PN16 20 230 - - 226 182 297.5 - - 172 122 235 186 F10 51
756-0250-1-04002 250 PN10 20 250 - 1 261 215 331.5 - 6 172 122 269 196 F10 58
756-0250-1-14002 250 PN16 20 250 - 1 260 215 331.5 - 6 172 122 269 196 F10 68
756-0300-1-04002 300 PN10 20 270 12 292 242 372 6 104 158 118 309 211 F10 83
756-0300-1-14002 300 PN16 20 270 1 12 293 242 374.5 6 114 313 263 312 240 F10 83
756-0350-1-04002 350 PN10 20 290 20 26 318 272 395.5 151 173 313 263 333 250 F10 110
756-0350-1-14002 350 PN16 20 290 19 25 318 272 400.5 155 176 313 263 338 250 F10 110
756-0400-1-04002 400 PN10 20 310 35 41 349 302 431.5 215 232 313 263 369 260 F10 142
756-0400-1-14002 400 PN16 20 310 33 39 349 302 431.5 216 232 313 263 369 260 F10 166
756-0450-1-04002 450 PN10 20 330 48 55 390 332 468.5 267 284 313 263 406 270 F10 184
756-0450-1-14002 450 PN16 20 330 47 53 389 332 498 269 283 320 269 403 203 F10 184
756-0500-1-04002 500 PN10 20 350 63 69 418 338 496.5 322 335 313 263 434 280 F10 240
756-0500-1-14002 500 PN16 20 350 63 69 426 371 535 326 338 320 269 440 213 F10 240
756-0600-1-04002 600 PN10 20 390 94 100 481 393 604 426 437 364 313 509 267 F14 410
756-0600-1-14002 600 PN16 20 390 92 98 502 435 657 424 435 406 355 532 235 F10 410
3D drawings
Enquiry
Scroll for more info

Components

1. Body Ductile iron GJS-500-7 (GGG-50)
2. Drive shaft Stainless steel 431
3. Bearing Bronze / PTFE composite
4. Cover Stainless steel
5. Key Stainless steel A2
6. Set screw Stainless steel A2
7. End cover Stainless steel
8. Disc Ductile iron GJS-500-7 (GGG-50)
9. Stub shaft Stainless steel 431
10. Spacer Bronze
11. Thrust bearing Bronze
12. End plate Ductile iron GJS-500-7 (GGG-50)
13. Washer Stainless steel A2
14. Bolt Stainless steel A2
15. Screw Stainless steel A2
16. O-ring EPDM rubber
17. Gasket EPDM rubber
18. Nut Stainless steel A2
19. Seal retainer ring Stainless steel
20. Seal ring EPDM rubber
21. Gearbox Cast iron

Test/Approvals

  • Hydraulic test according to EN 1074-1 and 2 / EN 12266 |
  • Seat: 1.1 x PN. Body: 1.5 x PN. 
  • Approved according to WRAS Certificate No. 1702367

Standards

  • Designed according to EN 593
  • Face-to-face dimension according to EN 558 Table 2 Basic Series 14
  • Standard flange drilling to EN1092-2 (ISO 7005-2), PN10/16
0 Files In the package
Our website uses cookies for statistical analysis, to improve our website and serve you optimally. By visiting our website, you consent to our and third party use of cookies as described in our privacy and cookie policy.
Read more