1. Home /
  2. Product finder

AVK CENTRIC LUG BUTTERFLY VALVE, PN6/10/16

Loose EPDM liner for high temperature, with single acting pneumatic actuator, DN25-400

AVK headquater in Skovby Galten, Denmark

Contact

AVK International A/S

Bizonvej 1, Skovby, 8464 Galten, Denmark

Centric butterfly valve with loose liner and single acting pneumatic actuator - Lug for wastewater treatment and HVAC to max. 130° C

AVK centric butterfly valves with loose liner are available in wafer, lug and U-section design with a wide standard range of actuators. The butterfly valves are designed with square driven anti-blowout shaft and slim disc of acid-resistant stainless steel with machined and polished disc edges resulting in low torques.

Variant 820/10-016
Material: Ductile iron/ 1.4408 disc
DN: DN25 - DN400
PN: PN16
Closing direction: Clockwise to Close

Features

  • Ductile iron with long neck for insulation
  • Loose liner of EPDM for high temperatures with integrated gasket faces and “saw profile” for optimum grip in body
  • Square driven anti-blowout shaft in one-piece design up to DN 400, and from DN 450 with key and keyway in two-piece stub design with two self-lubricating bearings
  • Slim disc of acid-resistant stainless steel with machined and polished edges reducing the friction between liner and disc
  • Low operating torques allowing use of cost-effective actuators
  • 200 μ epoxy coating up to DN 400, 250 μ polyurethane from DN 450, optionally other coatings
  • According to PED 97/23/EC appendix 1
  • Mounted with a single acting pneumatic actuator: Up to DN 450: Body of extruded aluminum with ALODUR® corrosion protection. Anodized and polyester coated end caps. Honed cylinder surface and symmetric rack and pinion design for long service life. One-piece blow-out proof nickel-plated drive shaft with bearing guided one-piece pinion. High quality bearings and seals for low friction and a wide operating temperature range. All screws of stainless steel. According to EN ISO 5211, VDI/VDE 3845, NAMUR and ATEX (Directive 94/9/CE). From DN 500: Scotch yoke actuator designed to provide a quarter-turn movement for either on/off or modulating duty. Body of 225 μm polyurethane coated carbon steel. A chromium plated alloy steel thrust bar supports the transverse loads of the scotch yoke. Inside nickel-plated cylinders and bronze sliding blocks on the torque arm ensure minimum friction. A dynamic floating piston seal reduces friction and avoids stick-slip effect after prolonged periods without operation. According to IEC IP66M/67M for environmental protection, PED 97/23/EC and ATEX94/9/EC.

Downloads

Datasheet
Installation
Appendix
Animation
AVK_Centric_butterfly_valve.mp4

Reference nos. and dimensions:

Scroll for more info
AVK ref. no. DN
mm		 Product
PN Class		 Flange
drilling		 L
mm		 L2
mm		 H2
mm		 W2
mm		 W3
mm		 W
mm		 W1
mm		 Theoretical
weight/kg
820-0025-10-02020160006 25 PN16 PN10/16 30 101 51 110 232 105 204 4.8
820-0032-10-02020160006 32 PN16 PN10/16 30 101 51 110 232 105 204 4.8
820-0040-10-02020160006 40 PN16 PN10/16 33 108 54 130 252 105 204 5.4
820-0050-10-02020130006 50 PN10 PN10/16 43 116 72 135 270 119 241 7.9
820-0065-10-02020130006 65 PN10 PN10/16 46 131 82 150 285 119 241 8.7
820-0080-10-02020120006 80 PN 6 PN10/16 46 188 92 160 295 119 241 11
820-0100-10-02020120006 100 PN 6 PN10/16 52 219 102 180 327 131 259 15
820-0125-10-02020120006 125 PN 6 PN10/16 56 248 120 195 370 149 304 20
820-0150-10-02020120006 150 PN 6 PN10/16 56 274 133 210 385 149 304 21
820-0200-10-02020020006 200 PN 6 PN10 60 332 163 240 447 183 395 38
820-0250-10-02020020006 250 PN 6 PN10 68 402 196 279 550 223 473 62
820-0300-10-02020020006 300 PN 6 PN10 78 472 232 315 586 223 473 74
820-0350-10-02020020006 350 PN 6 PN10 80 520 257 330 679 284 605 125
820-0400-10-02020020006 400 PN 6 PN10 102 584 292 365 745 319 710 172
2D/3D drawings
Enquiry
Scroll for more info

Components

1. Bolt Stainless steel A2
2. Washer Stainless steel A2
3. O-ring NBR rubber
4. Shaft Stainless steel 420
5. Body Ductile iron GJS-400-15 (GGG-40)
6. Liner EPDM, high temp.
7. Disc Stainless steel 316

Standards

  • Designed according to EN 593
  • Face-to-face dimension according EN 558 - Series 20
  • Standard flange drilling to EN1092-2 (ISO 7005-2), PN10/16
0 Files In the package