AVK CERTUS™ PE BALL VALVES, GAS MOP10

Fusible ends, full bore, OD20 - OD180, SDR11

PE ball valve CERTUS™. For gas to max. 20°C. Note: The maximum working temperature is set according to the ISO9080 lifetime requirements for PE pipes

AVK has an extensive range of internationally approved PE ball valves, ranging as of OD20 up to OD180mm. Made from high performance PE100 material AVK PE ball valves can be welded to all PE100 and PE80 pipes making the valve an integral part of fully welded leak-free pipe system. Minimum full bore for all sizes ensures limited pressure drop and greater flow through the valve. Valves are delivered with double spigot length, allowing for a second electro fusion weld if needed.

Variant 85/30-002
Connection: PE Pipe Ends
Material: Polyethylene (PE)
DN: DN25 - DN150
PN: PN16
Closing direction: Clockwise to Close

Features

  • Seat, ball and grease combination ensuring low operating torques and avoids sticking over time
  • Grease with minimal wearing off from the lubricated surfaces for improved long term performance
  • Easy mounting of all standardised spindles due to internal and external drive
  • Overtorque protection and replaceable top cap under live conditions
  • With double spigot length allowing for 2 electrofusion joints
  • Traccoding (barcode) + AVIT (QR code) - asset management to record, track and identify where valves are located and ensure traceability at all times
  • Seat compression accurately set during automated welding process

Reference nos. and dimensions:

AVK ref. no. D4
mm
D6
mm
D1
mm
D2
mm
D3
mm
D5
mm
D7
mm
D8
mm
D9
mm
D10
mm
D11
mm
Theoretical
weight / kg
Enquiry
85-020-30-23203001 20 26 305 155 95 3.0 46 49.6 20.0 82 76 0.8
85-032-30-23203001 32 26 320 155 95 3.0 46 49.6 20.0 88 70 0.8
85-040-30-13203001 40 26 340 155 95 3.7 46 49.6 20.0 98 66 0.9
85-063-30-23203001 63 51 435 205 135 5.8 46 49.6 20.0 130 84 1.8
85-090-30-23203001 90 74 520 285 180 8.2 46 49.6 20.0 158 123 3.8
85-110-30-21203001 110 90 560 280 205 10.0 31 49.6 20.0 164 96 5.5
85-125-30-11203001 125 90 585 280 205 11.4 31 49.6 20.0 182 89 5.9
85-160-30-21203001 160 131 700 370 280 14.6 35 49.6 20.0 196 120 13.8
85-180-30-11203001 180 131 735 370 280 16.4 35 49.6 20.0 220 110 14.4

Downloads

Datasheet (PDF)
Certificate(s)

Components

1. Top cap PP GF
2. Screw Stainless steel A4
3. O-ring NBR rubber
4. O-ring NBR rubber
5. Stem POM
6. Body PE 100
7. Ball seat NBR rubber
8. Seat retainer PE 100
9. Ball POM
10. Spigot PE 100
11. Stem Polyamide
12. Seat retainer PP
13. Ball PP
14. Ring PA GF
15. Pin Stainless steel A4

Test/Approvals

  • Hydraulic test according to BS750.
  • Approved according to KITE MARK

Standards

  • EN12201-4, EN1555-4, Designed according to GIS/V7 Part 2, ISO4437-4
Our website uses cookies for statistical analysis, to improve our website and serve you optimally. By visiting our website, you consent to our and third party use of cookies as described in our privacy and cookie policy.
Read more